Image is not available
Image is not available
Image is not available

borna godaz

manufacturer of cathodic protection anodes

Slider

Impressed Current Anti Fouling System

Monday, 14 May 2018 00:00

Copper and Aluminum Anodes for Impressed Current Anti Fouling System

The purpose of the Impressed Current Antifouling system is to prevent blockages in seawater cooling system caused by various forms of marine growth, primarily barnacles and mussels.

Blockages are expensive and time consuming to remove, particularly when whole sections of pipework need to be cleaned or replaced.

 

Anti Fouling System.png 

There is also the risk that seawater valves and other important items of equipment are affected jeopardizing the operational capability and safety of the vessel.

Even partial blockages can have serious consequences, making engines run at abnormally high temperatures and significantly increasing fuel usage. This has a direct bearing on the cost of vessel operation and profitability.

The system is based on the electrolytic principle and usually consists of pairs of copper and aluminum anodes which are mounted in sea chests or strainers and wired to a control panel.

 

Anti Fouling System borna godaz.png

 

In operation, the copper anode produces ions which are carried by the flow of seawater, creating an environment in which barnacles and mussels will not settle or multiply. By introducing copper ions in very small concentrations, around 2 ppb, the Impressed Current Anti Fouling system interrupts the settlement sequence. The action of the copper ions is assisted by aluminum hydroxide created by aluminum anodes which flocculate the released copper ions. This highly gelatinous copper-aluminum hydroxide floc is carried throughout the system and tends to spread out into the slow moving areas closer to the pipe surfaces where marine larvae are most likely to settle.

As a result, marine growth larvae do not settle, instead passing direct to discharge. At the same time, a cupro-aluminum film is built up on the internal surfaces of pipes to suppress corrosion.

In this way, the system has a dual action protecting seawater pipework against bio-fouling and corrosion.

 

Contact us

02156233930-02156233929
02156232587-02156236590
02156230236
 Info@bornagodaz.com
Tehran Province, Shamsabad Industrial City, Golbarg Number 2

     

bornagodaz map

Bornagodaz

BORNA Godaz Company was established on the path of development of BORNA Electronic activities in the field of cathodic protection in 2004. ...

more...

 

Download Bornagodaz General catalouge

All rights reserved for the birthagodaz group.

Designed and developed by Nonegar Processing